Storage and handling deserve attention before a delivery arrives. A good receiving plan considers the product, its packaging, the storage area and the way bundles will be moved. The objective is to avoid preventable damage, manage exposure and keep the material identifiable until it is used.
Prepare the storage area
Plan a suitable location and follow the handling and storage information for the particular product. Engineered wood should not be treated as unaffected by moisture simply because it has been manufactured from bonded material. The product specification and its intended exposure conditions remain relevant during storage and use.
Keep product instructions in view
WoodSolutions guidance emphasises dry, protected storage for engineered wood products, with appropriate support and attention to air circulation. Use product-specific instructions to determine the actual arrangement. Covers, supports and the storage environment should be considered together rather than applied as an improvised solution after a bundle has been exposed.
- Prepare access and a suitable receiving area before arrival.
- Check bundle identification against the packing information.
- Use appropriate lifting equipment and handling methods for the pack.
- Inspect for visible transit damage or unexpected moisture exposure.
- Retain labels and keep different items distinguishable.
Inspect and record what arrives
Check the bundle count, item references and visible condition when receiving the delivery. If something differs from the agreed packing information, record the issue and raise it promptly with the relevant parties. Photographs are useful when they show the item identification and the condition being discussed, rather than an unidentified close-up.
Keep processing separate from storage
If material will be cut, drilled or otherwise processed after delivery, make sure the relevant product and application instructions are available. Storage guidance is not permission to modify a structural member in any location or manner. Confirm the proposed processing with the responsible project or product team.
Use the enquiry stage to explain any special storage, lifting or identification requirements. Agreeing those points in advance makes it easier to prepare a pack that supports a clear receiving process.
Sources & further reading
These sources provide general background. Product-specific documents and application requirements should be confirmed for the material being ordered.





