Engineered wood manufacturing · Specifications, process & export preparationdora@yeluwood.com

What Is LVL? A Practical Introduction for Buyers

Understand laminated veneer lumber, the role of veneer orientation and the information needed to select a product.

What Is LVL? A Practical Introduction for Buyers
YELUWOOD EditorialUpdated 2 min read

Laminated veneer lumber, usually shortened to LVL, is an engineered wood product assembled from bonded layers of veneer. In a typical LVL member, most veneer grain follows the length of the piece. That construction is different from the cross-layer arrangement commonly associated with plywood. The name describes a product family; it does not, by itself, state the grade, permitted use or performance of every member.

Start with the application

An enquiry for a house-framing member is different from an enquiry for an industrial packing component. The two may look similar in a photograph, yet the performance evidence, identification and processing requirements can be different. Describe the intended use before asking for a price so that the conversation starts with the right product specification.

For a structural application, the designer and buyer need the relevant product information and the requirements of the project. A general product introduction cannot establish an allowable load or span. For a packing or furniture application, the discussion may instead focus on assembly dimensions, appearance, machining and the conditions in which the component will be used.

What to put in an LVL enquiry

  • Intended application and destination market.
  • Finished length, width and thickness, with the measurement units clearly stated.
  • Required performance, grade or project document references, where applicable.
  • Surface finish, edge details, marking and any machining requirements.
  • Quantity, bundle preferences and the information needed on the packing label.

Look beyond a product photograph

Images are useful for discussing appearance, size and processing, but they do not establish the specification of a shipment. Ask how the product will be identified and which documents relate to the material being offered. When comparing quotations, check that dimensions, performance requirements, finishing and packing refer to the same scope.

Connect the product to the process

The YELUWOOD manufacturing pages show veneer selection, adhesive application, layup, pressing, cutting, finishing and packing. Use those pages to understand the sequence and prepare questions. If a product must meet a particular project requirement, state it in the enquiry and ask what supporting information can be supplied for that product.

Sources & further reading

These sources provide general background. Product-specific documents and application requirements should be confirmed for the material being ordered.

Ready to prepare your enquiry?

Use this guide to start a product-specific conversation.

Discuss your requirements
EmailCall